Quax LOFT Bauanleitung Seite 40

LOFT
Quax
First dreams
®
First steps
Step 10 : Use the parts of step 9, both drawer backs P11 and eight wood screws I
Place the drawer backs (P11) between the drawer sides. Push the wood screws (I) in the drillings at the back of
the outside of the drawer sides and tighten them in the backs. Push the drawer fronts with their connectors into
the drillings and over the wooden dowels of the drawer sides. Tighten the eccentrics.
Step 11 : Use the parts of step 10, both drawer bottoms P12, ten nails C, four slider parts O and twelve wood
screws J
Push the bottoms (P12) into the slot of the drawer fronts and check if distance A = B. Fasten the bottoms every 8
cm to the backs using ten nails (C). Place the drawer sliders (O) upon the drillings of the drawer sides. Fix each
slider with three wood screws (J).
40
Commode met 2 laden en 3 vakken
54F 03 00x
Kommode mit 2 Schubladen und 3 Fächern
Commode à 2 tiroirs et 3 compartiments
Chest with 2 drawers and 3 compartments