Water Level Control - STARLINE Roldeck Anleitung

7.3 Water Level Control

Level Control
The water level control is a combination of
a Starline level control and an overflow.
The water level control's purpose is to level
optimally the swimming pool's water level.
Keep the water level at the correct
level, in order that the Roldeck
doesn't experience any hindrance
from edge stones, the safety edge
or gripping bars.
Overflow
The overflow in the skimmer makes sure
excess water will immediately drain into the
waste pipe.
The correct water level will be set by the
installer.
Level Control
The level control is fitted with 4 LED
indicators:
A Max. water level (Roldeck cannot open
or close)
B Water level correct
C Water supply enabled
D Min. water level (refer to A)
If all LED's light, the level control has run for
12 hours continuously; if LED A+D light, there
is a miscommunication between the sensor
and the level control. Consult your installer in
that case.
User manual Starline Roldeck
RDCM – V01
A
B
C
D
23