Switching On The Robot Vacuum - Bosch BSR1 Serie Gebrauchsanleitung

Before starting
6
7 a
b
c

Switching on the robot vacuum

Note
The red sticker on the robot vacuum's carry handle is
designed to make it easier to find the on/off switch un-
derneath the carry handle.
Fig.
Remove the sticker before starting the appliance.
Note
The on/off switch is underneath the robot vacuum's
carry handle.
Fig.
a) Lift the robot vacuum's carry handle up.
b) Press the on/off switch in the direction of the arrow.
The robot vacuum is started.
The buttons on the front of the appliance will light up
from left to right and three short beeps will indicate
that the vacuum is starting up.
Note
The robot vacuum takes approximately 25 seconds to
start up.
approx.
c) Put the robot vacuum's carry handle down.
25 s
!
Caution
The battery in the robot vacuum must be fully charged
before using it for the first time. Fig.
6
7
en
8
77