Safety Precautions - OHAUS T21P Bedienungsanleitung

T21P Indicator
1. INTRODUCTION
This manual contains installation, operation and maintenance instructions for the
T21P Indicator. Please read this manual completely before installation and
operation.

1.1 Safety Precautions

For safe and dependable operation of this equipment, please comply
with the following safety precautions:
• Verify that the input voltage range printed on the data label matches the local AC
power to be used.
• Make sure that the power cord does not pose a potential obstacle or tripping
hazard.
• Use only approved accessories and peripherals.
• Operate the equipment only under ambient conditions specified in these
instructions.
• Disconnect the equipment from the power supply before cleaning.
• Do not operate the equipment in hazardous or unstable environments.
• Do not immerse the equipment in water or other liquids.
• Service should only be performed by authorized personnel.
1.2. Overview of Parts and Controls
1
2
Calle 23B No. 81A - 62 Modelia PBX: (571) 410 28 48 Fax: (571) 263 72 24 Bogota, D.C. - Colombia.
www.tecnipesaje.com
3
tecnipesaje@tecnipesaje.com
4
6
5
tecnipesaje@outlook.com
EN-1