Answering Machine - Topcom BUTLER E350 Gebrauchsanweisung

Topcom Butler E350/Twin/Triple/Quattro
10 Reset of the phone
This will undo all changes and set back all default settings (ringer volume, ringer melody,
etc...).
Press menu button
press OK ÆEnter the PIN code (default='0000') and press
standby.
Default handset settings are:
Handset volume
Handset melody
Flash time
Dial mode
AutoAnswer
Keypad tone
Receiver volume
PIN code
ECO mode
All memories (redial, phonebook, call log,...) and handset name will not be
erased!

11 Answering machine

The Butler E350 has a built-in digital answering machine with a recording capacity of
7 minutes The answering machine can be operated remotely and features the possibility of
recording your own outgoing messages (OGM 1) (maximum of 40 seconds).
There are 2 possibilities:
• With OGM 1, the caller has the possibility to leave a message
• When memory is full, OGM 2 is activated. This pre-recorded outgoing message is
played without the caller having the opportunity to leave a message
The max. recording time for each incoming message is 2 minutes
11.1 LED display
The LED display on the base indicates how many messages you have received. When there
are new messages, the LED display on the base will blink and only indicate the amount of
new messages. If the answering machine is switched off, the LED display does not light up.
'FL' will be shown on the display when the internal memory is full and no new messages can
be recorded.
14
ÆScroll to 'System' and press
3
3
Recall 1
Tone
ON
ON
2
'0000'
OFF
ÆScroll to 'RESET' and
ÆThe unit will go back to
Topcom Butler E350/Twin/Triple/Quattro