Auto Answer; Setting The Dialling Mode; Handset Name; Changing The System Pin - Topcom BUTLER E350 Gebrauchsanweisung

5.13 Key lock
When the keypad is locked, pressing any key will have no effect during standby (except
holding the key).
Press and hold the
and hold the key again to un-lock the keypad.
When there is an incoming call, you can still answer the call by pressing the OFF-hook button
. During the call, the keypad functions as normal. When the call is ended, the keypad
will be locked again.

5.14 Auto answer

Auto answer enables you to answer an incoming call by simply picking up the handset from
the charging cradle. You do not need to press a key to answer the call.
Press menu button
Æ Use the up
or down
press .

5.15 Setting the dialling mode

There are two types of dialling mode:
DTMF/Tone dialling (the most common) (default)
Pulse dialling (for older installations)
To change the mode of dialling:
Press menu button
Æ Use the up
or down
want with the up

5.16 Handset name

You can change the name that appears on the sceen (max. 10 characters) during idle stage:
Press menu button
Æ Use the up
or down
name is shown Æ Delete the character by the mute
new name Æ Press the menu/OK button

5.17 Changing the system PIN

The system PIN code (default='0000') is used to protect various settings like register rights,
access right to some menu's in the phone. You can change the PIN:
Press menu button
ÆUse the up
or down
ÆEnter the new PIN and press OK ÆEnter the new PIN again to confirm and press
.
Topcom Butler ME350/Twin/Triple/Quattro
key Æ appears on the display and the keypad is locked Æ Press
ÆUse the down
button and select 'Autoanswer' Æ Select ON or OFF and
ÆUse the down
button and select 'Dial Mode' Æ Select 'Pulse' or 'TONE' you
or down key and select
ÆUse the down
button and select 'Handset Name' Æ The currect handset
ÆUse the down
button and select 'Change Pin' ÆEnter the old PIN and press
Topcom Butler E350/Twin/Triple/Quattro
button to scroll to 'Settings' and press
button to scroll to 'Settings' and press
.
button to scroll to 'Display' and press
-key Æ Use the keypad to enter the
to confirm.
button to scroll to 'System' and press
9