DTV MANUAL
TUNING
(only for DVB-T)
DTV MANUAL
TUNING
(only for DVB-C)
42
You can program individual channels in DVB-T mode
manually here if the input signal is received via the an-
tenna.
This option is only available if you have previously select-
ed DTV as the input source.
VHF / UHF
DTV
RADIO
DATA
You can program individual channels in DVB-C mode
manually here if the input signal is received via cable.
This option is only available if you have previously select-
ed DTV as the input source.
FREQUENCY
SR
QAM TYPE
DTV
RADIO
DATA
Select the channel to be searched.
Press OK to start the search. The
signal quality will be shown on
the bar underneath.
The number of digital TV channels
found is displayed.
The number of digital radio sta-
tions found is displayed.
The number of data channels
found is displayed.
Set the search frequency with
or the number buttons on
the remote control.
Set the symbol rate.
Set the modulation.
The number of digital TV channels
found is displayed.
The number of digital radio sta-
tions found is displayed.
The number of data channels
found is displayed.