Medion LIFE P18077 Bedienungsanleitung Seite 120

Menu Item Setting
TRAN-
SPONDER
LNB TYPE
LNB
POWER
22KHZ
TONE-
BURST
Use the arrow button EPG to switch to the
TRANSPONDER column and use the arrow
buttons  to select the transponder for which
you want to start the search. Now press the OK
button to mark the relevant transponder with a
red tick.
ADD
Press the yellow button to add a new transpond-
er. Enter the required value and confirm with OK
or press EXIT to cancel the process.
FRE-
Enter the frequency using the num-
QUENCY
ber buttons.
SYMBOL
Enter the symbol rate using the
(KS/S)
number buttons.
POLAR-
Select the polarity with .
ITY
DELETE
Select the transponder that you want to delete as
described above and press the red button. Con-
firm the query with YES.
EDIT
The setting options correspond to those for ADD.
SCAN
The setting options correspond to those for
SCAN under satellite.
Enter the oscillator frequency for your LNB type
here. The default setting is 09750/10600.
The following UNICABLE SETTINGS can be
made here.
IF CHAN-
You can set the IF channel here.
NEL
CENTRE
You can set the centre frequency
FREQ
here.
SAT PO-
You can set the satellite position
SITION
here.
Set the LNB power here.
Set the sound here, the default setting is AUTO.
If your satellite system requires a tone burst, you
can set it to BURST A or B here.
DE
EN
47