4.8.1.
Cable and antennae
Menu Item
TUNE TYPE
DIGITAL TYPE
SCAN TYPE
NETWORK ID
(only in DVB-C mode)
FREQUENCY
(only in DVB-C mode)
SYMBOL RATE
(only in DVB-C mode)
SORTING BY LCN
After you have made all the settings, press OK. The channel search will then
start.
24
Tuning Setup
Tune Type
Digital Type
Scan Mode
Network ID
Frequency
Symbol Rate
Sorting by LCN
Back
MENU
Setting
Use the direction buttons to select the tune type:
ATV+DTV (search for analogue and digital TV
•
channels);
ATV (search for analogue TV channels);
•
DTV (search for digital TV channels)
•
Use the direction buttons to select the digital con-
nection type (DVB-T, DVB-C or SATELLITE).
Set the search mode. Leave the setting on NET-
WORK SCAN or FULL if you do not want to
make any special settings.
Set the network ID. The default setting is AUTO.
Set the frequency. The default setting is AUTO.
Only active if the option NETWORK SCAN has
been selected in search mode.
Set the symbol rate.
Logical Channel Numbering: Select the setting
ON if you want to order the channels based on a
preset channel list (if available from the channel
supplier).
DTV
DVB-C
Full
Auto
Auto
Auto
ON
Start
OK