Medion LIFE P18077 Bedienungsanleitung Seite 113

40
Set the frequency. The default setting is
FRE-
AUTO.
QUENCY
Only active if the option NETWORK
(only in
SCAN has been selected in search mode.
DVB-C
mode)
Set the symbol rate.
SYMBOL
RATE
(only in
DVB-C
mode)
Logical Channel Numbering: Select the
SORTING
setting ON if you want to order the chan-
BY LCN
nels based on a preset channel list (if
available from the channel supplier).
After you have made all the settings, press OK. The chan-
nel search will then start.
If you have selected the source SATELLITE, the following
setting options are available:
COUNTRY
Select the desired country for the chan-
nel search.
SATELLITE
Select the satellite via which the search
will be started.
Set the search mode.
SCAN
DEFAULT: A search on the selected satel-
MODE
lite will be carried out based on the tran-
sponder list saved for this satellite. This re-
quires a little time.
NETWORK SCAN: Activate/deactivate
the network search.
BLIND SCAN: A complete search on the
selected satellite will be carried out. This
will also take into account new transpond-
ers that have not been added to the list
of transponders. Two searches are carried
out with the blind scan. The first search
identifies the transponders for the satel-
lite, while the second search locates the
channels. The blind search requires the
most time.