Zero Positioning Of Chronograph Hands - Festina IFMFS60 Betriebsanleitung

ZERO POSITIONING OF CHRONOGRAPH HANDS

(after replacing the battery)
Chronograph Chronograph
minute hand second hand
Button (A)
Button (B)
Time correction
position
IFMFS60/61 IFMFS60/61 IFMFS60/61 IFMFS60/61
When resetting the chronograph after
replacing the battery, if the chronograph
second hand does not return to the 0
seconds position or if the chronograph
second hand has shifted out of position
due to a strong impact, perform zero
positioning of the chronograph hands
according to the procedure described
below.
24
IFMFS60/61 IFMFS60/61
ZERO POSITIONING OF CHRONOGRAPH HANDS
(after replacing the battery)
[Chronograph Hand Zero Positioning]
1. Pull the crown out to the time correction position.
2. Press button (A) to position the chronograph second at the 0 position.
* The chronograph second hand can be advanced rapidly by depressing
button (A) continuously.
3. Once the chronograph second hand has been positioned at the 0 position,
reset the time and return the crown to the normal position.
4. Press button (B) to check that each of the chronograph hands has been
reset to the 0 position.
25