Auto Store (As); Program Scan (Ps); Seek The Pty; Af Function - ZENEC ZE-MC192 Bedienungsanleitung

Recalling a station
1. Select a band (if needed).
2. Touch an on-screen preset button (6) to select the corresponding stored station.

AUTO STORE (AS)

■ Press the [AS/PS] button on the front panel or press and hold the
screen to automatic scan and store strong radio stations in the 6 preset channels in the
current band.

PROGRAM SCAN (PS)

1. Press and hold the [AS/PS] button on the front panel or press the
K
screen. Scan the stations in the 6 preset channels in the current band.
2. Touch the button on the screen to automatically scan all stations in current band to
preview stations.
3. Press any button to stop scanning and listen to the selected station.
[
SEEK THE PTY (Program Type)
■ Touch on the screen to enter the PTY menu, then touch to select one in the PTY
menu, the unit will auto seek the next available PTY by increasing tuning frequency until
the program type matches the PTY, if no matched was found, the tuner will return to
original radio and "None" is displayed.
[
AF FUNCTION (Alternative Frequency/Auto Following)
■ Touch on the screen to activate/deactivate the AF function. When AF is activated
and a radio signal is too weak, the tuner automatically switches to the best alternative
frequency.

NOTE:
■ During auto switching radio frequency, some interference could be heard. Turn off the
AF function can cease this issue.
\
TA FUNCTION (Traffic Announcement)
■ Touch on the screen to activate/deactivate the AF function. When TA is activated,
the unit will auto seek an available TP or TA station. After the seeking, no matter if PTY
was found, the tuner will auto seek each 1 minutes.
■ When TA is activated and a traffic announcement is received, the current playing source
is overridden by the traffic announcement automatically, if the tuner was last set to the
FM band but not if it was last set to the AM band. When traffic announcement is over,
the current playing source will be resumed.

REGION

■ When AF and Region are activated, auto tuning to those stations within the region
assigned. When AF is activated and Region is deactivated, auto tuning to those station
without any region boundary.

MONO

■ When monophonic function is activated, the tuner automatically switches to mono
mode. If monophonic function is deactivated, the tuner automatically switches to mono
mode and stereo mode. It's depending from the signal strengh of the selected radio
station.
99
ENGLISH
B
button on the
B
button on the