Velleman MONCOLHA7PN5 Bedienungshandleitung Seite 4

5. Use
•
Power-On/Off
Press the power button (1 or 6) to switch the monitor on. To switch off, hold for 2 seconds.
o
•
Input Source Selection
Press repeatedly the switch button (9) on the remote control to switch from AUX1 → AUX2 → CAMERA.
o
•
Menu
Press the menu button (5) to display the OSD and continue pressing the menu button or the down (8) or up (10)
o
button to select a function. Modify the setting as desired with the setting adjustment buttons (7 and 11).
When using the remote control, press the menu button on the remote control (12) to display the OSD and press the
o
down (8) or up (10) button to select a function. Modify the setting as desired with the setting adjustment buttons (7
and 11).
BRIGHT brightness
CONT contrast
COLOR colour
TINT hue
ZOOM display mode
REVERS rotate image
POWER auto power function
CAMERA
mirror function
•
Volume
Adjust the volume with the volume adjustment buttons (7 and 11).
o
6. Technical Specifications
Display
Resolution
Pixels
Luminance
Video Input Signal
OSD Function
Power Supply
Monitor
Remote Control
Dimensions
Weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or
injury resulted from (incorrect) use of this device.
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
MONCOLHA7PN5_v2
1~100
1~100
1~100
1~100
4:3 or 16:9
REV1: upside down, REV2: upside down + mirrored, REV3: mirrored, REV4:
normal
AUTO / NORMAL
♣
MIRROR / NORMAL
7" TFT Active Matrix (16:9/4:3)
1440 (H) x 234 (V)
336 960
400 cd/m²
1.0Vpp / 75Ω (composite video signal)
horizontal/vertical image reversing, setting adjustment and volume
max. 10-32VDC
1 x 1.5V CR2025 battery (incl.)
171 x 125 x 19mm
400g
4
♣
only on camera input
VELLEMAN