Specifications; Emp 2015 Receiver/Amplifier Combination; Sk 500 Bodypack Transmitter - Sennheiser EMP 2015 Bedienungsanleitung

12 Specifications

EMP 2015 receiver/amplifier combination

Amplifier section
Operating voltage
Power consumption
Fuse
AF output power
Harmonic distortion (at nom. dev., 1 kHz)
Line input
Receiver
Output impedance
Frequency response Line input
Receiver
Signal-to-noise ratio
(LINE OUT)
(SPEAKER OUT)
Temperature range
Protection class
Dimensions
Weight
Receiver section
Modulation
Frequency ranges
Transmission/receiving frequencies
Switching bandwidth
Noise reduction system
Nominal deviation / peak deviation
Sensitivity (with HDX, peak dev.)
Antenna input
Antenna input impedance

SK 500 bodypack transmitter

Modulation
Frequency ranges
Transmission/receiving frequencies
Switching bandwidth
RF output power at 50 Ω
Power supply
Max. current consumption at nom. voltage
Dimensions
Weight
70
230 V (EU and UK version)
115 V (US version)
< 3 W (stand by)
< 20 W (position "ON")
< 200 W (max. rms level)
2 AT
4 x 10 W at 4 (rms)
4 x 20 W at 4 (peak)
0.5 %
1 %
4 x 2...8 Ω
20 – 18,000 Hz
70 – 18,000 Hz
> 90 dBA
rms
> 80 dBA
rms
0 °C – 40 °C
2
210 x 70 x 205 mm
2,600 g
FM mono
518 – 550, 630 – 662, 740 – 772, 790 – 822, 838 – 870 MHz
1280, tunable in steps of 25 kHz,
16 switchable fixed frequency memories
32 MHz
Sennheiser HDX
± 24 kHz / ± 48 kHz
< 2.5 µV
BNC
50 Ω
FM mono
518 – 550, 630 – 662, 740 – 772, 790 – 822, 838 – 870 MHz
1280, tunable in steps of 25 kHz,
16 switchable fixed frequency memories
32 MHz
typ. 10 mW
9 V PP3 alkaline manganese battery (IEC 6 LR 61) or
9.6 V/160 mA rechargeable battery
approx. 40 mA
110 x 65 x 22 mm
approx. 255 g