Connecting Fm Systems For Persons With Impaired Hearing - Sennheiser EMP 2015 Bedienungsanleitung

EMP 2015 with two FM systems
¸
52

Connecting FM systems for persons with impaired hearing

You can connect an FM transmitter of an FM system of any manufacturer to
each of the two line outputs (LINE OUT)
The FM transmitter transmits the signals of one or several speakers and, if
connected, an audio device to the FM receiver of the hearing impaired. As a
result, the speaker doesn't have to wear several transmitters and microphones
but only the transmitter and the microphone of the Soundfield System. In
addition, the use of the Soundfield System ensures excellent sound quality.
For connecting an FM transmitter, you require a connecting cable fitted with
an RCA plug and a 3.5 mm jack plug. (Some FM transmitters are fitted with
a 2.5 mm jack socket.)
Connect the RCA plug of the connecting cable to one of the two RCA
sockets (LINE OUT)
Connect the 3.5 mm jack plug of the connecting cable to the line input of
the FM transmitter.
Adjusting the output level for FM transmitters
All standard FM transmitters are fitted with a line or audio input which
should be used for connecting the transmitter. In general, the line output
level control (LINE OUT)
as far as possible.
Testing the FM system
Before you use an FM system for the first time, connect it to the Soundfield
System as described above and test it via monitoring headphones to ensure
problem-free operation.
If the speaker's voice sounds distorted, reduce the line output level by turning
¸
control counterclockwise.
.
at the rear of the EMP 2015.
¸
on the EMP 2015 should be turned clockwise