Napoleon BIM730 Montageanweisungen Seite 2

A SMALL ACCESS HOLE IS REQUIRED TO RUN WIRE FROM LED
MUST BE MOUNTED A MINIMUM OF 20cm BELOW BOTTOM OF
GRILL TO PREVENT MODULE FROM OVER HEATING. ENSURE
OUTDOOR GFI ELECTRICAL OUTLET
RECOMMENDED - LOCATE ON LEFT SIDE OF
GRILL FOR ROTISSERIE USE.
86.5cm
RECOMMENDED
MINIMUM 65cm 2 OF VENTILATION REQUIRED
ON EACH END OF CABINET
MODEL OPENING DIMENSIONS
W
BIM485 75.5cm 54.5cm 19cm
BIM605 93cm
BIM730 110cm
SIDE BURNER 34.5cm 44.5cm
BUILT-IN UNIT OPENING DIMENSIONS
(LIGHTS) DOWN INTO CAVITY OF CABINET. BATTERY PACK
WIRES AND MODULE DO NOT INTERFERE WITH DRIPPAN
REMOVAL OR COME IN CONTACT WITH BOTTOM OF GRILL.
GAS INLET
OPENING
H
D H
54.5cm 19cm
54.5cm 19cm
10cm
D
W
CABINET FRAME AND CABINET MUST BE
MADE FROM NON-COMBUSTIBLE MATERIAL
2
Opening of at least 32cm
for side burner.
BUILT-IN
SIDEBURNER
W
D
H
4.5cm
GAS INLET
OPENING
NOTES
in must be provided for combustion air