Leds On Battery - Stihl ADG 1 Gebrauchsanleitung

approved STIHL batteries. This
exchange of data may take several
minutes.
Refer to the "Technical Information"
bulletins for engineering changes and
software updates which have been
introduced since publication of this
instruction manual. "Technical
Information" bulletins supplement the
instruction manual.
The display provides information on the
test procedure.
Follow the instructions on the
N
display.
For further information, hold the
N
pushbutton (4) depressed for about
1 second.
After Test
Take the battery out of the unit.
ADG 1

LEDs on battery

Four light emitting diodes indicate the
condition of the battery.
Press button (1) to activate the
N
display – the display goes off
automatically after 5 seconds.
The light emitting diodes can glow or
flash green or red.
Light emitting diode glows con -
tinuously green.
4
Light emitting diode flashes
green.
Light emitting diode glows con -
tinuously red.
Light emitting diode flashes red.
If the green light emitting diodes glow /
flash
80 - 100 %
60 - 80 %
40 - 60 %
1
20 - 40 %
0 - 20 %
The green light emitting diodes indicate
the battery's state of charge by glowing
and flashing continuously.
English
15