Remove the parts.
Carefully remove any filings from around
the spindle.
Fit the new grinding disc and protective
guard.
Start the chain grinder and let it run freely
for a few seconds to check that the grinding
disc is correctly fitted.
Cleaning and maintenance
The chain grinder can be cleaned by wiping
GB
it with a damp cloth. Grinding dust and
filings can be removed using a brush or
compressed air.
Do not use corrosive or abrasive cleaning
agents.
30
Service centre
Note: Please quote the product model
number in connection with all enquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
•
Complaints
•
Replacement parts
•
Returns
•
Guarantee issues
•
Open weekdays from 07.00 to 17.00
(Fridays until 15.30)
•
E-mail: service@hpschou.com