Herunterladen Inhalt Inhalt Diese Seite drucken

Important Information; Set-Up Information - DeVilbiss PulseDose LT Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 29
PulseDose will not pulse
PulseDose works fine for a
couple of minutes, then
sensitivity seems to drift and
may stop working altogether.

IMPORTANT INFORMATION

Physician information
Name: __________________________________________________________________________________
Address: ________________________________________________________________________________
________________________________________________________________________________________
Telephone: _______________________________________________________________________________
Emergency Telephone: _____________________________________________________________________
Prescription Information
Patient's Name: __________________________________________________________________________
Flow Setting (LPM): ________________________________________________________________________

Set-up Information

Name of Person Setting Up: ________________________________________________________________
Oxygen Provider
Emergency Telephone Number: ______________________________________________________________
This instruction guide was reviewed with me and I have been instructed on the safe use and care of the
DeVilbiss PulseDose oxygen conserving device.
________________________________________________________________________________________
Patient or Caregiver Signature
EN - 10
1. Cannula is not adjusted
properly.
2. Unit is not turned on.
3. Batteries discharged or not
installed.
4. Mouth breathing with closed
soft palates.
5. Unit did not reset while
changing batteries (red light stays
on).
1. Using pediatric cannula or any
cannula that restricts continuous
flow capacity of 10 lpm.
1. Check all cannula connections
to make sure they are tight, and
adjust the cannula to fit
comfortably in your nose. Ensure
tubing is not kinked.
2. Turn the rotary selector to the
appropriate setting.
3. Install new batteries.
4. Breathe through the nose
(cannula).
5. Turn the unit off and back on
using the rotary selector.
1. Replace with standard nasal
cannula.
Date
SE-1000

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis