Operation - Hoover Otsein OHDC7X Gebrauchsanleitung

40000443English.fm Page 13 Friday, August 8, 2003 6:22 PM

Operation

1. Open the door and load the drum with
laundry. Ensure that garments do not
hinder closure of the door.
2. If drying delicate items press the
'CLASE TEJIDOS' button to reduce
the heat level. Press again on
completion, to select high temperature.
HIGH Heat setting
LOW Heat setting
3. Turn 'DRYING TIME' dial until the
required drying time aligns with the
symbol ●.
The 'Planchado Rápido' setting shown
by the symbol
TIME' dial provides a conditioning and
anti-crease function. The dryer will
heat the load for 9 minutes followed by
a 3 minute cool down period and is
especially good for garments which
may have been left for some time prior
to ironing, in a linen basket for
example. Garments may also become
stiffened when dried outside on a
washing line or inside on radiators. The
'Planchado Rápido' process relaxes the
creases in the fabric making ironing
quicker and easier.
4. Gently close the door pushing it slowly
until you hear the door 'click' shut.
5. Press the 'ON' button. The indicator
will light and the drying cycle begins.
6. The load is dried by tumbling in
7. When the program is fully completed
8. Clean the filter and empty the water
on the 'DRYING
9. Clean the condenser after
ENGLISH
thermostatically controlled warm air.
Cool air is used for the last 10 minutes
to reduce creasing and cool the load
ready for handling.
the drum will stop rotating and the dial
will point to the number 0.
Open the door and remove the load.
WARNING!
THE DRUM, DOOR AND LOAD
MAY BE VERY HOT.
container after every drying cycle to
ensure maximum dryer efficiency.
(See 'Filter' and 'Water Container'
sections.)
approximately every 10 drying cycles
to ensure maximum dryer efficiency.
(See 'Condenser' section.)
13