Synchronisation Of The Transmitter - dB Technologies B-HYPE MOBILE Bedienungsanleitung

SYNCHRONISATION OF THE TRANSMITTER

To play a file from the SD card / USB device:
1. Turn B-HYPE MOBILE on after connecting the
power supply cable (switch in ON position).
Check that the MASTER volume is on a
medium/low level at this stage.
2. Open the battery compartments of the
transmitters as shown in the previous sections.
3. Shortly press the button ON/OFF/MUTE on the
transmitter.
4. Select a channel with the keys X (
and Z ( symbol) on the R-BHM receiver.
5. Hold key X ( symbol) pressed for a few
seconds on receiver R-BHM: the CHANNEL
values on the display will start flashing.
6. Position the IR lens of the transmitter in front
of the display of R-BHM. The correct distance is
maximum of approx. 15-30 cm.
7. Synchronisation will be carried out in a few
seconds and the CHANNEL values on the
display will stop flashing.
8. Adjust the gain on the transmitter using the
relevant rotary switch and the supplied micro
screwdriver.
9. Place the cover of the battery back on the
transmitter.
B-HYPE MOBILE
32
symbol)
English
Code 420120272 REV. 1.1