Ht-Bhm; Housing With Battery Charger For Ht-Bhm - dB Technologies B-HYPE MOBILE Bedienungsanleitung

HT-BHM

The handheld transmitter (handheld radio microphone) is
equipped with:
A - Status LEDs
B - ON/OFF/MUTE BUTTON (depending on whether it is
pressed for a few seconds or instantaneously, it turns on/
mutes/turns off the microphone)
C - IR lens useful during synchronisation of the device with
the R-BHM receiver
D - Rotary switch for gain adjustment
E - Micro screwdriver for gain adjustment [D]
F - Removable cover of the battery housing (placed on the
back)
WARNING
On HT-BHM, the use of RECHARGEABLE AA
batteries of the Ni-MH type (not supplied) is
required. The use of Lithium, Alkaline, Ni-Cd
or other types of batteries is not allowed.
Batteries are inserted by unscrewing the cover [F] and
inserting the batteries of the type indicated above,
following the correct polarity.
If the radio microphone is not used for a long period,
remove the batteries from the device and store them in a
suitable place.
To use HT-BHM with B-HYPE MOBILE see the
synchronisation procedure in the relevant paragraph.

HOUSING WITH BATTERY CHARGER FOR HT-BHM

With B-HYPE MOBILE in ON or RECHARGE mode, if HT-
BHM is correctly inserted in the housing on the back, an
appropriate circuit will recharge the batteries (Ni-MH
rechargeable batteries).
The LED of the housing can be:
• RED - the battery is charging
• GREEN - the battery has completed its recharge cycle
• FLASHING RED - the protection circuit has identified an
incorrect battery type in the radio microphone. Replace
them immediately with the appropriate type (Ni-MH)
B-HYPE MOBILE
30
!
English
Code 420120272 REV. 1.1