Servicing; Cleaning; Service Intervals - Parker MIDIGAS 2 Benutzerhandbuch

5 Servicing

5.1 Cleaning

Clean the equipment with a damp cloth only and avoid excessive moisture around any electrical sockets. If required you may use a mild
detergent, however do not use abrasives or solvents as they may damage the warning labels on the equipment.

5.2 Service Intervals

The service operations should be performed at the hours run or fixed time intervals specified below (whichever occurs first).
Component Operation
Generator Check status indicators located on the control panel.
Generator Check regulated outlet pressure
Check O
Generator
System Check filter drains
O Cell
Calibrate oxygen sensor
2
System Check inlet air quality
Generator Check for air leaks
Generator Check pressure gauges during purging for excessive back pressure
Generator Check condition of electrical supply cables and conduits
Generator Check cyclic operation
Replace mist–x silencer
Generator
Recommended Service A
Replace buffer tank filter.
Filtration
Recommended Service B
Replace/Calibrate oxygen sensor
Generator
Recommended Service C
Replace/Service valves
Generator
Recommended Service D
18
Description Of Service Required
purity
2
- Check
C
B
A
with O Analyser
2
– Replace – Recommended Process
Typical Recommended Service Interval
A
without O Analyser
2
B