Herunterladen Inhalt Inhalt Diese Seite drucken

Hinweise Zur Inbetriebnahme; Notes About Using This Model For The First Time; Indications Relatives À La Mise En Service; Opmerking Voor De Ingebruikname - Märklin BR 50 Anleitung

Vorschau ausblenden Andere Handbücher für BR 50:
Inhaltsverzeichnis

Werbung

Wichtig:
Im Fahrbetrieb (rmin = 360 mm): Lok und Tender auf maximalen
Abstand einstellen. Nur bei der Präsentation z.B. in einer Vitrine
kann der Abstand zwischen Lok und Tender minimiert werden
(Auslieferungszustand).
Important:
In regular layout operation (required minimum radius = 360 mm
/ 14-3/16"): Set the locomotive and the tender for the maximum
spacing. The spacing between the locomotive and the tender
can be reduced to the minimum only when the model is on
display such as in a display case (as delivered from the factory).
Important :
En exploitation (rmin = 360 mm) : Régler l'écart entre locomotive
et tender à la valeur maximale. Ne régler l'écart sur une valeur
inférieure que pour la présentation, par exemple dans une vitrine
(état à la livraison).
Belangrijk:
In het rijbedrijf (rmin = 360 mm): loc en tender op de maximale
onderlinge afstand instellen. Alleen bij een presentatie bijv. in
een vitrine kan de afstand tussen loc en tender geminimaliseerd
worden (toestand bij levering).
6
Importante:
En funcionamiento: (rmin = 360 mm): regular la distancia entre la
locomotora y el ténder al máximo. Solo para presentaciones, p.e.
en vitrinas, se puede acortar la distancia entre la locomotora y
el ténder (como se entrega).
Importante:
Nell'esercizio di marcia (rmin = 360 mm): regolare locomotiva e
tender per la massima distanza. La distanza tra locomotiva e ten-
der può venire ridotta al minimo soltanto in caso di esposizione,
ad es. in una vetrina (condizione di fornitura).
Viktigt:
Ställ in loket och tendern på maximalt avstånd (rmin = 360 mm)
under körning. Endast vid presentation, t ex i ett vitrinskåp kan
avståndet mellan lok och tender minimeras (läge vid leverans).
Vigtigt:
I køredrift (rmin = 360 mm): Indstil lokomotivet og tenderen til
maksimal afstand. Afstanden mellem lokomotivet og tenderen
kan kun minimeres ved udstilling, f.eks. i en vitrine (leveringstil-
stand).

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

H0 37832

Inhaltsverzeichnis