Herunterladen Diese Seite drucken

Märklin T 44 SJ Series Gebrauchsanleitung Seite 5

Werbung

Function
Possible operating systems:
6646/6647 Märklin Transformer, Märklin Delta,
Märklin Digital, Märklin Systems.
Recognition of the mode of operation: automatic.
Addresses that can be set (Control Unit): 01 – 80
Address set at the factory: 44
Mfx technology for the Mobile Station / Central Station.
Name set at the factory: T44 376 SJ
Adjustable acceleration (ABV).
Adjustable Braking delay (ABV).
Adjustable maximum speed.
Setting the locomotive parameters electronically
with the Control Unit, Mobile Station or Central
Station.
No warranty or damage claims shall be accepted in those cases where
parts neither manufactured nor approved by Märklin have been installed
in Märklin products or where Märklin products have been converted in
such a way that the non-Märklin parts or the conversion were causal to the
defects and / or damage arising. The burden of presenting evidence and
the burden of proof thereof, that the installation of non-Märklin parts or the
conversion in or of Märklin products was not causal to the defects and / or
damage arising, is borne by the person and / or company responsible for
the installation and / or conversion, or by the customer.
WARNING! This product contains magnets. Swallowing more than one
magnet may cause death in certain circumstances. If necessary, see a
doctor immediately.
Safety Warnings
This locomotive is to be used only with an operating
system designed for it (Märklin 6646/6647 AC transfor-
mer, Märklin Delta, Märklin Digital or Märklin Systems).
Use only transformers rated for your local hou-
!
sehold power.
Do not under any circumstances use transformers
rated for 220 volts or 110 volts.
This locomotive must never be supplied with power
from more than one transformer.
Pay close attention to the safety warnings in the
instructions for your operating system.
The feeder track must be equipped to prevent inter-
ference with radio and television reception, when
the locomotive is to be run in conventional operation.
The 74046 interference suppression set is to be used
for this purpose.
The maintenance work necessary with normal operation
of this locomotive is described below. Please see your
authorized Märklin dealer for repairs or spare parts.
5

Werbung

loading

Diese Anleitung auch für:

H0 37940