Seite Sommaire : Page Inhaltsverzeichnis: Informationen zum Vorbild Informations concernant la locomotive réelle Hinweise zur Inbetriebnahme Indications relatives à la mise en service Sicherheitshinweise Remarques importantes sur la sécurité Wichtige Hinweise Information importante Multiprotokollbetrieb Mode multiprotocole Schaltbare Funktionen Fonctions commutables Parameter/Register Paramètre/Registre Wartung und Instandhaltung...
Informationen zum Vorbild Information about the Prototype Für den Triebzug der Baureihe 403, der den dieselge- The railroad allocated a considerable sum of money for triebenen Trans Europ Express BR 601 ablösen sollte, equipment and features for the class 403 powered rail car ließ...
Informations concernant la locomotive réelle Informatie van het voorbeld Pour la rame automotrice de la Série 403, qui devait prendre Het treinstel van de serie 403, die de dieseltrein Trans le relais du Trans-Europ-Express BR 601 actionné par une Europe Express serie 601 moest aflossen, mocht wat kosten locomotive diesel, la compagnie de chemin de fer ne recula van de spoorwegen.
Sicherheitshinweise • Der volle Funktionsumfang ist nur unter Trix Systems, DCC und unter mfx verfügbar. • Die Lok darf nur mit einem dafür bestimmten Betriebssys- • Eingebaute, fahrtrichtungsabhängige Stirnbeleuchtung. tem eingesetzt werden. Im Digitalbetrieb schaltbar. • Analog max. 15 Volt =, digital max. 22 Volt ~. •...
Seite 9
Hinweis: Beachten Sie, dass nicht alle Funktionen in allen mfx-Protokoll Digital-Protokollen möglich sind. Unter mfx und DCC können Adressierung einige Einstellungen von Funktionen, welche im Analog- • Keine Adresse erforderlich, jeder Decoder erhält eine Betrieb wirksam sein sollen, vorgenommen werden. einmalige und eindeutige Kennung (UID).
DCC-Protokoll Es wird empfohlen, die Programmierungen grundsätzlich auf dem Programmiergleis vorzunehmen. Adressierung Logische Funktionen • Mögliche Adressen: Kurze, lange und Traktionsadresse • Adressbereich: Anfahr-/Bremsverzögerung 1 – 127 (kurze Adresse, Traktionsadresse) • Die Beschleunigungs- und Bremszeit können getrennt 1 – 10239 (lange Adresse) von einander eingestellt werden.
Safety Notes • The full range of functions is only available under Trix Systems and under DCC and mfx. • This locomotive is only to be used with the operating • Built-in headlights that change over with the direction of system it is designed for.
Seite 14
Note: Please note that not all functions are possible in all mfx Protocol digital protocols. Several settings for functions, which are Addresses supposed to be active in analog operation, can be done • No address is required; each decoder is given a one- under mfx and DCC.
Seite 15
DCC Protocol We recommend that in general programming should be done on the programming track. Addresses Logic Functions • Possible addresses: short, long, and m.u. address • Address range: Acceleration / Braking Delay 1 – 127 (short address, m.u. address) •...
f0 f8 f0 - f3 f4 - f7 Controllable Functions STOP mobile station Headlights Function f0 Function f0 Sound effect: Pantograph — Function 1 Function f1 Function f1 Locomotive operating sounds — Function 2 Function f2 Function f2 Sound effect: Horn —...
Remarques importantes sur la sécurité • Elimination : www.maerklin.com/en/imprint.html • L’intégralité des fonctions est disponible uniquement en • La locomotive ne peut être utilisée qu‘avec le système exploitation Trix Systems, DCC et mfx. d‘exploitation indiqué. • Feux de signalisation s‘inversant selon le sens de mar- •...
Seite 19
protocoles mfx & DCC par exemple, le décodeur choisira le Protocole mfx protocole numérique mfx. Adressage Indication : remarquez que toutes les fonctions ne peuvent • Aucune adresse n’est nécessaire, le décodeur reçoit tou- pas être actionnées dans tous les protocoles numériques. tefois une identification unique et non équivoque (UID).
Seite 20
Protocole DCC • Pour toute information complémentaire, voir le tableau des CVs, protocole DCC. Adressage Il est recommandé, de réaliser la programmation, fonda- • Adresse possibles: Courtes, longues et adresses de traction mentalement, sur la voie de programmation. • Catégorie d’adresse : Fonctions logiques 1 à...
f0 f8 f0 - f3 f4 - f7 Fonctions commutables STOP mobile station Fanal éclairage activé Fonction f0 Fonction f0 Bruitage : Pantographe — Fonction 1 Fonction f1 Fonction f1 Bruit de roulement — Fonction 2 Fonction f2 Fonction f2 Bruitage : Trompe —...
Veiligheidsvoorschriften • Ingebouwde, rijrichtingsafhankelijke frontverlichting is in het digitaalsysteem schakelbaar. • De loc mag alleen met een daarvoor bestemd bedrijfssys- • Minimale te berijden radius: 360 mm. teem gebruikt worden. • Analoog max. 15 Volt =, digitaal max. 22 Volt ~. Multiprotocolbedrijf •...
Seite 24
Opmerking: let er op dat niet alle functies in alle digitaal- mfx-protocol protocollen mogelijk zijn. Onder mfx of DCC kunnen enkele Adressering instellingen, welke in analoogbedrijf werkzaam moeten zijn, • Een adres is niet nodig, elke decoder heeft een éénmalig ingesteld worden.
Seite 25
DCC-protocol Het is aan te bevelen om het programmeren alleen op het programmeerspoor uit te voeren. Adressering Fysieke functies • Mogelijke adressen: kort, lang en tractieadres • Adresbereik: Optrek en afremvertraging 1 – 127 (kort adres, tractieadres) • De optrek- en afremvertraging kunnen onafhankelijk van 1 –...
Seite 36
Due to different legal requirements regarding electro-magnetic compatibility, this item may be used in the USA only after separate certification for FCC com- pliance and an adjustment if necessary. Use in the USA without this certification is not permitted and absolves us of any liability.