Video Setup Page - Silvercrest SDDD 7 A1 Bedienungsanleitung Und Serviceinformationen

OFF: Sound is played back unchanged. Loud parts will be loud and quiet parts will
be quiet.
FULL: The difference in volume between loud and quiet parts will be minimised in
accordance with the setting. Quiet sounds will be played louder and loud
sounds will be played quieter accordingly.
To change the setting, switch to the scale on the right-hand side using  and set the desired value
with or. Confirm your selection by pressing ENTER.

VIDEO SETUP PAGE

Please note that settings made in this menu only apply to the DVD player (A) and will not affect the
monitor (B).
SHARPNESS
Here you can change the image sharpness to one of three predefined settings (HIGH, MEDIUM or
LOW).
BRIGHTNESS, CONTRAST, HUE and SATURATION

Using the  or  buttons, select the option to change.

Confirm your selection by pressing ENTER to go in to the setup mode.

The value currently enabled will be displayed. Change this value as required using the  or 
buttons.

The range for "BRIGHTNESS" and "CONTRAST" goes between "-16" and "+16" and for "HUE"
and "SATURATION" between "-9" and "+9".

Confirm your selection by pressing ENTER to save the setting and exit setup mode. Make any
required changes to the other settings.
SilverCrest SDDD 7 A1
English - 31