Klarfit 10012059 Bedienungsanleitung Seite 9

6. Connect the seat tube (3) to the seat
(7) by using the M8 locknuts (22) and
the M8 flat washer (24).
7. Turn out the Adjustable knob (9) and
push the seat tube (3) into the Main
frame (1), and then turn the knob in
firmly.
9
8. Put the Handlebars (5) in the fixing hol-
der of the Post tube (4) in correct positi-
on. Use M8x35mm bolt (18), M8 nut cap
(21), M8 spring washer (23) and M8 Cur-
ved washer (25). To push the Grips (6)
onto the Handlebars (5).
9. Cross the Meter bracket (14), and plug
the upper meter cable into the meter
(13). Insert the Meter bracket(14) into
the Post tube (4), then fix the Meter(13)
10. Install the pedals (10) into the screw
holes of the crank respectively.
11. Make sure you have assembled the ap-
paratus correctly before using it! Ensure
that all bolts, nuts etc, are firmly fixed.