Klarfit 10012059 Bedienungsanleitung Seite 8

1. Unpack the carton and place all the
parts on the floor.
2. Install the Rear and Front tube (2)
to the Main frame (1) with Bolts
M8x65mm (17), M8 spring washer
(23), M8 curved washer (25) and M8
nut cap (21), please tighten firmly.
Mounting
3. Now connect the bottom end of the
4. Push the post tube (4) into the main
5. Fit the Tension Control (8) with
meter cable (15) to the sensor cable
(16).
frame and fix with M8 spring washer
(23) M8 curved washer (25) and
M8x16mm bolts (19). Tighten them
firmly.
M5x16mm screw (20) to Post tube
(4).
8