Safety Instructions - LaserLiner LiveCheck Bedienungsanleitung

Read the operating instructions and the enclosed brochure
!
„Guarantee and additional notices" completely. Follow the
instructions they contain. This document must be kept in a
safe place and passed on together with the device.
Function / Application
Reliable and fast connection testing for finding faulty wiring
in sockets. The status of the wiring can be read off with the aid
of the indicator lamps and code key.

Safety instructions

• The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
• The measuring tools and accessories are not toys.
Keep out of reach of children.
• Modifications or changes to the device are not permitted, this will
otherwise invalidate the approval and safety specifications.
• Do not expose the device to mechanical stress, extreme temperatures
or significant vibration.
• Exercise extreme caution when working with voltages higher than
24 V/AC rms or 60 V/DC. Touching the electrical conductors at such
voltages poses a risk of life-threatening electric shocks.
• If the device comes into contact with moisture or other conductive-
residue, work must not be carried out under voltage. At and
above voltages of 24 V/AC rms / 60 V/DC, the presence of moisture
creates the risk of life-threatening electric shocks.
• Clean and dry the device before use.
• When using the device outdoors, make sure that the weather
conditions are appropriate and/or that suitable protection measures
are taken.
• In overvoltage category II (CAT II - 300 V), the voltage between the
test device and earth must not exceed 300 V.
• Before taking any measurements, make sure that both the area to
be tested (e.g. a line), the test device and the accessories used
(e.g. connection cable) are in proper working order. Test the device
by connecting it to known voltage sources (e.g. a 230 V socket in
the case of AC testing).
• Stop using the device if one or a number of its functions fails.
• Please ensure compliance with the safety regulations set out
by local and national authorities with regard to the correct and
proper use of the device.
• The device is not suitable for unsupervised use.
• The measuring device must not be used as a substitute for a
two-pole zero potential test.
LiveCheck
EN
05