Safety Instructions - LaserLiner AC-Check Bedienungsanleitung

Read the operating instructions and the enclosed brochure
!
„Guarantee and additional notices" completely. Follow the
instructions they contain. Safely keep these documents for
future reference.
Function / Application
Non-contact voltage tester with adjustable sensitivity for localising
electrical voltage in cables, sockets, lampholders and fuses. Visual
and acoustic signals indicate whether a voltage is present.

Safety instructions

• In overvoltage category III (CAT III), the voltage between the test
device and earth must not exceed 1000 V.
• Do not use the device in environments in which there are con-
ductive particles or where the occurrence of moisture (in the form
of condensation, for example) can create transient conductivity.
• Do not expose the device to mechanical stress, extreme tempera-
tures or significant vibration.
• Do not expose the device to moisture or liquids. When using
the device outdoors, make sure that the weather conditions are
appropriate and/or that suitable protection measures are taken.
• Please ensure compliance with the safety regulations set out
by local and national authorities with regard to the correct and
proper use of the device.
Symbols
Warning about hazardous electrical voltage:
Unprotected live components inside the device
housing are capable of posing a risk of electric
shock.
Protection class II: The test device has reinforced
or double insulation.
Overvoltage category III: Equipment in fixed
installations and for applications where specific
requirements with regard to the reliability and
availability of equipment have to be met, e.g.
circuit-breakers in fixed installations and devices
used in industrial applications which are
permanently connected to the fixed installation.
06
GB