Silvercrest SWR 1166 A1 Bedienungs- Und Sicherheitshinweise Seite 22

In this setup page can select your preferred
language (English/ German/ French/ Czech/
Dutch)
Enter default user name and password
"admin" into both user name and
password blank, then you can enter into next
page to reset user name and password for
first setup.
(A user name should consist of at least
8 characters. These should consist of letters with
upper case and lower case as well as optionally
special characters and one or several numbers.
A correspondingly long email address of the user
should be accepted.)
(A password should consist of at least
10 characters. It should contain characters in
upper and lower case, numbers as well as special
characters.)
Enter new user name and password login
again, then enter into setup page.
22 GB / IE
Since different connection types need different
cables and connection information,
Click Network - - -> WAN setting , to
select the Connection Type from DHCP(Auto
Config), Static(Fixed IP) or PPPoE(DSL/PON).
DHCP: insert LAN cable already with Internet
access to the WAN port of the router. Click
"Save/Apply".
PPPoE: Enter the Username and Password
provided by your ISP. PPPoE users usually have
DSL cable.
Static(Fixed IP): Enter the information
provided by your ISP in the corresponding fields if
Static(Fixed IP) is used.
Click "Save/Apply" after setting.