Before Use - Silvercrest SWR 1166 A1 Bedienungs- Und Sicherheitshinweise

Before use

Q
Note:
All parts have to be unpacked and the packaging
material has to be removed completely.
Before use, verify the package contents are
complete and undamaged!
SETTING UP AND PREPARATION
Place the router horizontally and extend the
antennas to the maximum angle.
Connect the modem to the Internet port on
your router with an Ethernet cable.
Turn on the router, and then wait about
1 minute for it to start.(power indicator and
2.4G/5G Wi-Fi signal indicator LED in blue)
INTERNET SETUP
Configure via Cell Phone:
Use the default wireless network name (SSID)
and password printed on the product label at
the bottom of the router to connect wirelessly.
Your phone will automatically jump to the
router setting page after connecting. If not, you
could enter 192.168.1.1 on the address bar
of a web browser to enter the setting page.
20 GB / IE
In this setup page can select your preferred
language (English/ German/ French/
Czech/ Dutch)
Enter default user name and password
"admin" into both user name and
password blank, then you can enter
into next page to reset user name and
password for first setup.