Installation - Velleman CAMCOLD4 Bedienungsanleitung

6. Installation

Wall Mounting
1. Stick the mounting pattern on the
desired installation spot.
4. Remove the dome from the
housing wearing gloves so as not
to leave fingerprints.
7. Replace the dome on the
camera. Wear gloves so as not to
leave any fingerprints.
10. Fix the camera onto the bracket.
7. Controlling the CAMCOLD4 using a Keyboard
a. Selecting the Camera
• Choose a camera by pressing the camera number 1 – 255 and the CAM key.
• Press -1 to choose the previous camera or press +1 to choose the next camera.
Example: Selecting camera n° 2.
o Press 2 and the CAM key to select camera n° 2.
o After having selected the camera, press -1 to select the previous camera or press +1 to select the next
camera.
CAMCOLD4_v2
2. Drill the mounting holes
according to the pattern.
5. Remove the cushions protecting
the lens.
8. Pass the cable with the RJ45
connectors through the bracket.
11. Fasten the included screws using
the included screwdriver.
6
3. Fix the mounting bracket base
onto the wall using the included
tools.
6. Remove the cushions protecting
the camera. Remember to set the
DIP switches before closing the
dome.
9. Pass the cable with the RJ45
connectors through the bracket.
12. Replace the cover and fasten it
with the included screws.
VELLEMAN