Velleman CAMCOLD4 Bedienungsanleitung Seite 10

Main menu
Display Setup
This menu enables you to show or hide the OSD menu. An item set on AUTO will only
be displayed when modified.
Camera Setup
Set up the general functions of the camera. Tilt the joystick up or down to select the
mode. If the LINE LOCK is activated, the video signal is synchronized with the AC
power. The video can fluctuate after a modification. RESET CAMERA will reinitialize the
camera.
P/T motion setup
Set up the general functions of the pan/tilt movement. The max. JOG SPEED is listed below with a 1x zoom. As the
zoom magnification is increased, the speed will be decreased so the camera will be controllable.
FAST 0°~160°/s
NORMAL 0°~80°/s
SLOW 0°~40°/s
If you inverse the JOG DIRECTION, the screen will move in the same direction as the
jog tilt direction. A normal JOG DIRECTION will invert the direction.
PARK action setup
This function enables you to point the camera at a specific target. The time is displayed
in an hh:mm:ss format and can be modified.
Original position setup
Redefine a particular pan position to the original position. In the SET ORIGIN
POSITION submenu, you can move the pan position using the joystick and redefine the
original position.
Alarm input setup
Match the alarm sensor to one of the preset positions. If an external sensor is activated,
the camera will move to the corresponding preset position.
CAMCOLD4_v2 10 VELLEMAN