Schwaiger DSR 1004 CW VFD Bedienungsanleitung Seite 11

061113_k7 200 ENG sat_shw
Connecting Your Equipment
TV with Terrestrial Antenna
1. Connect one end of RCA/Cinch cable to
the RCA/Cinch jack on the back of the STB and
the other end to a RCA/Cinch jack on your TV.
If your TV doesn't have a RCA/Cinch jack,
connect one end of RF cable to the TV OUT on the
back of the STB and the other end to
a RF input jack on your TV.
2. Connect one end of RF cable to the ANT IN
on the back of the STB and the other end to a ter-
restrial antenna connection or the jack for the pub-
lic antenna on the wall.
3. Finally connect the coaxial cable from the LNB to the LNB IN jack on back of the STB.
TV with Motorized System (DiSEqC 1.2)
1. Connect one end of RCA/Cinch cable to the
RCA/Cinch jack on the back of the STB and the
other end to a RCA/Cinch jack on your TV. If your
TV doesn't have a RCA/Cinch jack, connect one
end of RF cable to the TV OUT on the back of the
STB and the other end to a RF input jack on your
TV.
2. Connect one end of your coaxial cable to
the LNB IN connector on the STB and
the other end to the REC or Receiver
connector on the DiSEqC 1.2 motor.
3. Connect the coaxial cable from the LNB to the LNB connector on the DiSEqC 1.2 motor.
9
DIGITAL SATELLITE RECEIVER
11/13/06 2:16 AM ˘ ` 9 mac-4 HP LaserJet 5100 Series
(To RCA/Cinch on your TV)
(If your TV doesn't have RCA/ Cinch Jack)
(To RCA/Cinch on your TV)
(If your TV doesn't RCA / Cinch Jack)
T