Schwaiger DSR 1004 CW VFD Bedienungsanleitung Seite 10

061113_k7 200 ENG sat_shw
Connecting Your Equipment
1. Connect STB to a TV set
Connect your STB to a TV set with SCART, if your TV set is equipped for it.
Alternatively you can use A/V, TV out (UHF) or S/Video jacks.
2. Connect STB to a VCR
Connect the SCART jack from the VCR to the back of your STB.
Alternatively you can use A/V, TV out (UHF) or S/Video jacks.
3. Connect STB to a Digital Audio System
If you have a DAC with S/PDIF coaxial cable input, you can connect the STB with it to enjoy
higher quality sound. Connect S/PDIF coaxial cable to a digital amplifier.
4. Loop Through
If you have another analogue or digital STB and you wish to use the same LNB then you can
connect it via the loop through. Connect one end of the coaxial cable to the Loop Through on the
STB and connect the other end to the LNB IN on your second STB.
11/13/06 2:16 AM ˘ ` 8 mac-4 HP LaserJet 5100 Series
DIGITAL SATELLITE RECEIVER
T
8