Product Information; Manufacturer´s Data; Device Identification - Mafell S 50 M Originalbetriebsanleitung

You will find the following warnings and symbols in these operating instructions:
This symbol indicates where you will find notes for your safety. If disregarded, this may result in
very serious injuries.
This symbol indicates a potentially hazardous situation. If it is disregarded, the product or objects
in its vicinity may be damaged.
This symbol indicates tips for the user and other useful information.
1

Product information

for dust extractors S 50 M with Art.-No. 915 901, 915 920 
for dust extractors S 25 M with Art.-No. 915 910, 915 930
1.1 Manufacturer´s data
MAFELL AG
P. O. Box 1180, D-78720 Oberndorf / Neckar
Phone +49 7423 812-0, Fax +49 7423 812-218
1.2

Device identification

All data required for device identification are stated on the rating plate which is attached to the motor casing.
CE-mark to declare conformity with the essential health and safety requirements according to

Annex I of the Machinery Directive
Only for EU countries

Do not dispose of electric tools together with household waste material!
In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and
its implementation in accordance with national law, electric tools that have reached the end of their
life must be collected separately and returned to an environmentally compatible recycling facility.
1.3 Technical data
Operating mode

Voltage

Frequency

Power input (normal load)

Current (normal load)

Filter surface

Dimensions

Weight (without accessories)

Suction pipe connection diameter

Nominal volume flow

Associated pressure drop

S 50 M

S 25 M

S 50 M

S 25 M

-14-
English
Continuous operation
590 x 455 x 645 mm
(23 1/4 x 17 7/8 x 25 3/8 in.)
500 x 405 x 565 mm
(19 11/16 x 15 15/16 x 22 1/4 in.)
19.1 kg (42.1 lbs.)
13.2 kg (29.1 lbs.)
Ø 66/58 mm (2 5/8 / 2 1/4 in.)
230 V~
50 Hz
1200 W
5.2 A
8600 cm²
220 m³/h
248 mbar