Signs And Symbols; Product Information; Manufacturer´s Data; Device Identification - Mafell S 35 HEPA Originalbetriebsanleitung

1

Signs and symbols

2

Product information

for dust extractors S 35 HEPA with Art.-No. 919723
2.1 Manufacturer´s data
MAFELL AG, Beffendorfer Straße 4, D-78727 Oberndorf / Neckar, Phone +49 (0)7423/812-0, Fax +49
(0)7423/812-218

2.2 Device identification

All information required for device identification is available on the rating plate attached to the motor casing.

2.3 Technical data

Operating mode
Voltage, frequency
Power input (nominal load)
Current at nominal load
Airflow at the hose
Vacuum at the hose
Filter surface area
Dimensions
Weight (without accessories)
Diameter intake port connection
This symbol appears at places where you will find instructions for your
own safety.
Non-compliance with these instructions may result in very serious injuries.
This symbol indicates a potentially hazardous situation.
If this situation is not avoided, the product or objects in its vicinity may get
damaged.
This symbol indicates tips for the user and other useful information.
To reduce the risk of injury, please read the operating instructions.
Continuous operation
230 V~, 50 Hz
1200 / 1400 W
6 A
140 m /h/SE (4944.05 ft³/h/SE)
3
225 hPa/SE (3.26 psi/SE)
6000 cm
500 x 405 x 570 mm
(19.68 x 15.95 x 22.44 in.)
15.0 kg (33.06 lbs)
Ø 66/58 mm (2.6/2.28 in.)
-16-
(6.46 ft²)
2
120 V~, 60 Hz
1200 / 1400 W
12.5 A