Maintenance And Service; Maintenance And Cleaning - Bosch PushDrive Originalbetriebsanleitung

26 | English
Temperature-dependent overload protection
In normal conditions of use, the power tool cannot be overloaded. If the power tool is
overloaded or the permitted battery temperature is exceeded, the electronics of the
power tool will switch off until the temperature returns to within the optimum operating
temperature range.
Protection against deep discharge
The lithium-ion battery is protected against deep discharge by the Electronic Cell Protec-
tion (ECP). When the battery is discharged, the power tool is switched off by means of a
protective circuit: The application tool no longer rotates.

Maintenance and Service

Maintenance and cleaning

Before any work on the tool (e.g. maintenance, tool change, etc.) as well as dur-
u
ing transport and storage, set the rotational direction switch to the middle posi-
tion. There is a risk of injury from unintentionally starting the tool by applying pres-
sure to the spindle.
To ensure safe and efficient operation, always keep the power tool and the vent-
u
ilation slots clean.
If the battery is no longer working, please contact an authorised after-sales service agent
for Bosch power tools.
In order to avoid safety hazards, if the power supply cord needs to be replaced, this must
be done by Bosch or by a customer service centre that is authorised to repair Bosch
power tools.
After-sales service and advice on using products
Our after-sales service can answer questions concerning product maintenance and re-
pair, as well as spare parts. You can find exploded drawings and information on spare
parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any questions about
our products and their accessories.
In all correspondence and spare parts orders, please always include the 10‑digit article
number given on the type plate of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
1 609 92A 48W | (07.05.2018) Bosch Power Tools