Ordering Spare Parts - Pony CLASSIC R Bedienungsanleitung

E N G L I S H
BREAKDOWNS TO THE STEAM/AIR SPOTTING GUN (IF FITTED)
1. Steam available
machine, but pushing the
gun button no
available from nozzle.
1. The exhaust fan does not
work.

ORDERING SPARE PARTS

The spare parts must be ordered only by fax with
codes and descriptions in order to ensure the
rapid despatch of the parts.
IMPORTANT
For electrical components
220V/230V/240V 50 Hz supply (check on the
specification plate of the defective part), add to
the order code the letter corresponding to the
rating required as
table:
A 220V/230V 60Hz.
B 240V 50Hz.
C 200V 50Hz.
D 200V 60Hz.
E 190V 50Hz.
F 115V 60Hz.
G 110V 60Hz.
H 208V 50Hz.
I 24V 50Hz.
L 240V 60Hz.
M 254V 50Hz.
to the 1. Causes:
a) Micro-switch
steam defective.
b) Break
continuity.
c) Solenoid valve coil burned.
EXHAUST FAN BREAKDOWNS
1. Causes:
a) The fan is blocked by foreign
objects.
b) The
pedal does not work.
c) The
burned out.
d) The motor is burned out.
other than
given in the following
C H A P T E R 4
contact
of the gun cable
micro-switch on
motor condenser
Example 1:
An 230V 50 Hz coil remote control switch is
required.
Complete order information:
• Machine model: Table Type...
• Registration No. 110227
• Code No. 04775 - coil remote control switch
230V/50 Hz
• 1 piece
for
Example 2:
The same coil, but 254V, 50 Hz.
Complete order information:
• Machine model: Table Type.....
• Registration No. 110228
• 04775/M coil remote control switch 254V/50
Hz
• 1 piece
N.B.
1. The parts that appear in this manual without
an accompanying code number ARE NOT
AVAILABLE from stock.
2. The codes "POS.79" or "POS. 86" etc. that
appear next to some parts have nothing to
do with the spare part code for these parts,
and should not therefore be quoted in orders
for spare parts.
Page 4-7
1. Action:
a) Check the
contact and if necessary
replace it.
b) Check the continuity and
repair accordingly.
c) Replace burned coil.
1. Solutions:
a) Unblock
removing
bodies that are blocking it.
the b) Change the
on the pedal.
is c) Change
condenser.
d) Change the motor.
E N G L I S H
microswitch
the fan by
the foreign
micro-switch
the motor