Quick Test - Ortovox S1 SCANNER Gebrauchsanleitung

ENGLISH

QUICK TEST

with limited range
(test of the transmitters)
The group leader sets his/her S1
to "transmit test" via menu item
(= limited range).
If the S1 receives an audible (via the loudspeaker) and
visible signal (circle with 2 persons) from each individual
avalanche transceiver then the transmission function of
the units to be tested and the reception function of the
group leader are in order.
If a fault turns up on the checked device then the war-
ning triangle appears on the display. The warning trian-
gle signals a serious device fault on the checked device.
Possible faults can be queried by pressing
the -button (2).
Deviation from the
• Transmission frequency (457 kHz)
• Transmission period
• Period length
Go back to the short test using the -button (2).
If a fault is displayed please send your transceiver directly to your ORTOVOX
service office for inspection (see page 164).
51