COMMISSIONING
this product must be set.
Assign a product with a RS485 control
1) Press the programming button on the
receiver until the motor jogs.
channel.
channel with a motor jog.
Assign a product with a DRY CONTACT
control
selector corresponding to dry contact
connectors.
- .......
- .......
2) Press the programming button on the
receiver until the motor jogs.
3) Press the programming button on the
4
PROG
1
ST OP
Copyright © 2009 Somfy SAS. All rights reserved - V0 - 09/2009
2
ST OP