Maintenance And Inspection; Transport - AGT CV 74 H Bedienungsanleitung

Periode
Before starting
Periodically
Every 5 Working hours
Every 25 Working hours
Every 50 Working hours
Every 100 Working hours
Every 300 Working hours
*) Sight glass :
When the machine is horizontal, the sight glass must be filled with oil.
Also see engine manual or contact your dealer.
- Keep the machine horizontal to lessen chance of spoiling oil.
- While transporting the machine keep the gas valve closed.
- While transporting the machine on its side keep the carburettor pointed upward as
shown below.

Maintenance and inspection

Transport

Procedure
-Check the fuel level
-Check the ramming system lubrication with
sight glass*
-Check the engine oil
-Check for lose screws, nuts etc
-Clean engine cooling fins
-Check air filter
-Check spark plug
-Check shoe hardware
-Replace air filter
-Change oil ramming system once
Then after every 300 working hours
-Replace sparkling plug
-Replace engine oil
-Complete maintenance by your dealer
12