Maintenance And Inspection; Transport - AGT CV 73 H Bedienungsanleitung

Maintenance and inspection

Periode
Before starting
Periodically
Every 5 Working hours
Every 25 Working hours
Every 50 Working hours
Every 100 Working hours
Every 300 Working hours
*) Sight glass :
When the machine is horizontal, the sight glass must be filled with oil.
Also see engine manual or contact your dealer.
Keep the machine horizontal to lessen chance of spoiling oil.
-
While transporting the machine keep the gas valve closed.
-
Procedure
-Check the fuel level
-Check the ramming system lubrication
with sight glass*
-Check the engine oil
-Check for lose screws, nuts etc
-Clean engine cooling fins
-Check air filter
-Check spark plug
-Check shoe hardware
-Replace air filter
-Change oil ramming system once
Then after every 300 working hours
-Replace sparkling plug
-Replace engine oil
-Complete maintenance by your dealer

Transport

12