Date Stamp; Pre-Record - Silvercrest SCAW 5.00 B2 Bedienungsanleitung Und Serviceinformationen

Date Stamp

This function allows you to show the date and time of the recording in the bottom right corner
of a video.

Use the right or left navigation button (6) to select the

Press the centre navigation button (6) to confirm your selection.
The following settings are available:

Use the right or left navigation button (6) to select the setting you want.

Press the centre navigation button (6) to confirm your selection.
After the date stamp has been enabled, it is not possible to remove it from
the recording. You should therefore check if the date and time are properly
set prior to recording.

Pre-record

If this function is enabled, recording starts 3 seconds before you press the Record button (7)
to start recording.

Use the right or left navigation button (6) to select the

Press the centre navigation button (6) to confirm your selection.
The following settings are available:

Use the right or left navigation button (6) to select the setting you want.
Disables the date stamp.
Enables the date stamp.
Disables the Pre-record function.
Enables the Pre-record function.
SilverCrest SCAW 5.00 B2
icon.
icon.
English - 61