Auto Power Off - Silvercrest SCAW 5.00 B2 Bedienungsanleitung Und Serviceinformationen

SilverCrest SCAW 5.00 B2

Use the right or left navigation button (6) to select the

Press the centre navigation button (6) to confirm your selection.
The following settings are available:

Use the right or left navigation button (6) to select the setting you want.

Press the centre navigation button (6) to confirm your selection.

Auto power off

You can get the device to power off automatically after a certain time to save battery. If no
buttons are pressed during the preset time, the device powers off automatically. To switch the
camcorder back on, press the On/Off button (12).

Use the right or left navigation button (6) to select the

Press the centre navigation button (6) to confirm your selection.
The following settings are available:

Use the right or left navigation button (6) to select the setting you want.

Press the centre navigation button (6) to confirm your selection.
48 - English
Does not apply any changes.
Resets the device to the factory-default values.
Auto PowerOff disabled
Power off after 1 minute
Power off after 5 minutes
icon.
icon.