LAVAZZA EP 1800 Bedienungsanleitung Seite 20

EN
Press the on/off switch, moving it to position I.
7
The on light and the digital clock come on (red
colour). The luminous "LAVAZZATIME" wording
flashes. When both lights come on the machine
is ready for use.
LOADING THE HYDRAULIC CIRCUIT
At the first start of the machine, after a long
period of inactivity or in case of lack of water
in the tank, it is necessary to perform the hy-
draulic loading as shown below.
Position a container or a cup under the steam
1
arm.
Turn the steam dispenser knob anti-clockwise to
2
begin dispensing steam.
Wait at least 20 seconds.
3
End the flow of steam by turning the knob clock-
4
wise until it is in its resting position and remove
the container or cup.
ENERGY SAVING
After 30 minutes of inactivity the machine goes
into energy saving mode, the LAVAZZATIME
wording switch off and the two espresso dis-
penser buttons flash.
To turn the machine back on press one of the
two espresso dispenser buttons or lift the cap-
sule load lever.
18
MACHINE PREPARATION
MACHINE PREPARATION
DISPENSING HISTORY
Press buttons
see how many espressos you have
poured
SETTING THE TIME
Press and hold down button
for a few seconds.
The display indicating the hour
begins to flash.
Release button
button B
time.
Press button A.
The display indicating the minutes
begins to flash.
Release button
button B
the minutes.
Press button
operation.
EN
A B
and together to
A
A and press
repeatedly to set the
A and press
repeatedly to set
A to terminate the
15