Battery Charging & Recharging; Battery Indication - Vileda VR 302 Bedienungs- Und Pflegeanleitung

G
CHARGING BATTERY:

BATTERY INDICATION:

The battery indication is build in three blocks:
1. Three blocks illuminated: Battery is fully charged and full Eco program (90 min) or MAX mode (60 min) can be used.
2. Two blocks illuminated: Battery is half charged for up to 45min runtime in eco mode.
3. One block illuminated: Battery level is low. Recommended to start charging.
4. One block blinking: Battery needs to be charged. No cleaning mode possible.
!
TIPS TO EXTEND THE BATTERY LIFE:
• Before first use, charge the robot for 5hrs.
• Charge the robot as soon as battery power is low.
• The robot will return to the docking station automatically when cleaning is finished or battery power is
low. Therefore the docking station has to be plugged into the socket.
• If the robot is not to be used for a long time, fully charge the battery, turn the power switch off, remove
and store it in a cool, dry place.
• If the robot is not used more than 3 months, charge it directly by power adapter for 5hrs.
10
3.1 Battery charging & recharging
1. Placement of docking station
Place the docking station against the wall and remove
obstacles about 1 meter at two sides and about 2 meters
in front of the docking station.
2. If the robot is powered off, switch on the robot by pressing
the power switch at the right side of the robot.
3. Charge the robot in either way as shown on the left.
a. Plug the adapter into the robot and the other end to
power socket as shown in Fig.a.
b. Press the
control to operate the robot to go to the charging home
base for recharging as shown in Fig.b.
4. During charging the battery indication will build up the three
bars of the battery in a row. When fully charged all three
battery blocks will be illuminated permanently.
button on either the robot or the remote