How The System Works; Key Definitions - Petsafe PIG20-11041 Gebrauchsanweisung

How the System Works

A radio signal travels from the Fence Transmitter through a buried wire, marking the boundaries you wish to set for your dog.
Your dog wears a Receiver Collar that detects the signal at the boundary. As your dog approaches the boundary, the receiver
issues a warning tone. If he proceeds further, he receives a safe but startling Static Stimulation. While harmless, the stimulation
will persuade him to stay in the containment area you've established. Boundary fl ags are a temporary visual aid for your pet;
remove them after training. This Little Dog Deluxe In-Ground Fence™ has been proven safe, comfortable, and effective for pets
over 2.3 kg (5 pounds), neck sizes 15 cm to 40 cm (6" to 16").

Key Definitions

Fence Transmitter: The device that transmits the radio signal through the Boundary Wire.
Pet Area: The area within the Warning Zone where your pet can roam freely.
Warning Zone: The outer edge of the Pet Area where your pet's Receiver Collar begins to beep, warning him not to go into
the Static Stimulation Zone.
Static Stimulation Zone: The zone beyond the Warning Zone where your pet's Receiver Collar will emit a Static Stimulation,
signaling him to return to the Pet Area.
Boundary Width: The combination of the Warning Zone and the Static Stimulation Zone.
Receiver Collar: The device that receives the radio signal from the Boundary Wire.
Stimulation Level Button: The button to adjust the level of Static Stimulation your pet receives in the Static Stimulation Zone.
Receiver Indicator Light: The light that indicates the level of stimulation at which the Receiver Collar is set. This light also
serves as a low battery indicator.
Contact Points: The contacts through which the Receiver Collar delivers the safe Static Stimulation when your pet moves into
the Static Stimulation Zone.
Power Socket: Where the Power Adapter plugs into the Fence Transmitter. The Fence Transmitter is powered by a
standard outlet.
Boundary Control Switch: The switch to adjust according to the length of Boundary Wire used.
Ground Terminal: The terminal where the Ground Wire connects to the Fence Transmitter.
Boundary Wire Terminals: The terminals where the Boundary Wires connect to the Fence Transmitter in order to complete a
continuous loop.
Loop Indicator Light: The light that indicates that the Boundary Wire makes a complete loop, enabling the signal to
be transmitted.
Boundary Width Control: The knob that adjusts the width of the Warning and Static Stimulation Zones. Note: Adjusting the
knob does not change the level of Static Stimulation on the Receiver Collar.
Fence
Transmitter
Pet Area
Static Stimulation
Zone
Warning
Zone
6
Receiver Collar
Static Stimulation
Zone
Warning
Zone
Receiver
Indicator
Light
Contact Points
Boundary
Width
(Top)
Stimulation
Level Button
(Bottom)
Battery
Module
www.petsafe.net
Fence Transmitter
Boundary Control Switch
Power Light
Boundary Width
Control
Boundary Wire
Loop Indicator Light
Power
Socket
Ground
Terminal
Terminals